For custom fabric printing, supply your design at a minimum of 300 DPI at the actual size you want it printed, in RGB colour mode, as a PNG, TIFF, PDF, JPG, PS, AI, PSD or EPS file. If your design is a repeating pattern, upload one seamless tile at its real printed size rather than a full-width panel; we send you a proof with a ruler so you can confirm the scale before anything is printed.

Below: what "300 DPI at actual size" means in pixels, how to prepare a clean repeat, and which details to check before you upload your design.

Quick reference: file specifications

Setting Recommendation
Resolution 300 DPI minimum at actual print size; 600 DPI for very fine detail
Colour mode RGB (we handle the conversion for printing)
Accepted formats PNG, TIFF, PDF, JPG, PS, AI, PSD, EPS
Repeat patterns One seamless tile, sized to the scale you want on the fabric
Line weight Avoid lines thinner than 0.5 pt and very small text
White There is no white ink: white areas show the base fabric

What does "300 DPI at actual size" mean?

DPI (dots per inch) only means something when it is tied to a physical size. A file saved "at 300 DPI" that is only 5 cm wide will look soft if it is stretched to fill 30 cm of fabric. What matters is the pixel count compared with the printed size.

The calculation is simple: printed size in inches × 300 = pixels needed (1 inch = 2.54 cm).

Printed size of tile or motif Pixels needed at 300 DPI At 600 DPI
10 cm approx. 1,181 px approx. 2,362 px
20 cm approx. 2,362 px approx. 4,724 px
30 cm approx. 3,543 px approx. 7,087 px
150 cm (full fabric width) approx. 17,717 px approx. 35,433 px

So a 30 × 30 cm repeat tile should be roughly 3,543 × 3,543 pixels. If your artwork is smaller than that, either print it at a smaller scale or redraw it larger; simply raising the DPI number in your software (upsampling) adds pixels but not detail.

Vector files are the exception

AI, EPS and vector PDF files are built from shapes, not pixels, so they scale without losing sharpness. Any photos or textures embedded inside them still need to meet the 300 DPI rule at their printed size.

How to prepare a seamless repeat

Most printed fabric is made from a single tile that is repeated across the whole width and length of the cloth. Sending one tile instead of a giant panel keeps files small and makes the scale easy to adjust.

  • Check the edges. Motifs that cross the right edge must continue on the left; anything crossing the bottom must continue at the top. Offset the tile by half its width and height in your editor to spot seams.
  • Choose the repeat type. A straight (block) repeat stacks tiles in a grid; a half-drop or half-brick repeat shifts every other row or column, which hides the grid on busy florals.
  • Save the tile at its real size. The scale on the fabric follows the measurement embedded in your file. If you want a different size, tell us when you order and we can adjust it.
  • Think about the garment. A 30 cm motif reads well on a duvet cover but can be cut in half on a child's T-shirt. Large-scale prints suit wovens such as cotton canvas and twill; small, dense repeats suit jerseys, poplins and baby muslin.

Colour: why RGB, and what to expect on fabric

Send your file in RGB. RGB files generally produce the most vibrant results, and colour conversion for printing is handled on our side. A few things are worth knowing:

  • Screens glow; fabric reflects light. Printed colours will never match a backlit monitor exactly.
  • The same file can look slightly different on different fabrics, because each fibre takes up dye differently. Cotton and viscose are printed with reactive dyes, silk with acid dyes, and polyester qualities with sublimation.
  • For colour-critical work such as brand colours or a collection that must match across fabrics, test before you commit to a full run.

The easiest way to test is to order a swatch pack (€9 plus shipping). Each swatch is labelled with fabric name, weight (GSM) and composition, so you can see how base colour and texture will affect your print. On sublimation (polyester and Lycra) qualities you can also order a 20 × 20 cm test print of your own design.

Details that commonly cause problems

Hairlines and small text

Very fine lines (under 0.5 pt) and small lettering may not print clearly, especially on textured cloth such as muslin, French terry or linen. Thicken outlines slightly and keep text large enough to read at arm's length.

White areas

Digital fabric printing uses no white ink. Anything white in your file will show the colour of the base fabric, which is why a pure white design on white fabric will not be visible.

Low-resolution sources

Images taken from websites or social media are usually far too small for fabric. Work from your original artwork or scan hand-drawn pieces at 600 DPI.

Is your design not print-ready, or do you only have an idea? Our pattern design team can fix resolution, rebuild a seamless repeat, rescale it or draw an original pattern from your inspiration, for a flat €35 per design.

See the pattern design service →

What happens after you upload

  1. Upload your file on the custom upload page and choose a fabric. Several designs at once? Use bulk upload.
  2. Check your proof. We email you a CAD proof with a ruler showing the print size. If the scale is not what you want, ask for a change before printing.
  3. Printing. Your design is printed by our print partners in Istanbul using the method that suits the fabric, then checked before it ships.

Minimums depend on the print method: reactive-printed cotton, viscose and linen qualities start at 5 m per design. The minimum for every quality is listed on the fabric pricing page.

Ready to start? Upload your design, let us make it print-ready for you, or order a swatch pack first to choose your base fabric. Ordering regularly for a brand or studio? Open a trade account.

FAQ

Can I print a 72 DPI image on fabric?

Only at a very small size. A 72 DPI file at its intended size will look blurred or pixelated on fabric. Recreate or rescan the artwork so it reaches 300 DPI at the size you want printed.

Should I send CMYK or RGB files?

RGB. RGB files generally give more vibrant results, and colour conversion for printing is handled for you.

Which file format is best for fabric printing?

TIFF or PNG for raster artwork, because they are lossless. AI, EPS or PDF work well for vector designs. JPG is accepted, but save it at the highest quality setting to avoid compression artefacts.

How do I control how big my pattern prints?

Save your tile at the real size you want it on the fabric. We send a proof with a ruler for approval, and if you need a different scale, tell us and it can be adjusted before printing.

Can I see my design on fabric before ordering a full run?

Yes. Order a swatch pack to judge the base fabrics, and on sublimation qualities you can order a 20 × 20 cm test print of your own design. For anything else, contact us and we will help you plan a test.

Hinterlassen Sie einen Kommentar

Bitte beachten Sie, dass Kommentare vor der Veröffentlichung freigegeben werden müssen