Printed fabric rarely matches your screen exactly because a monitor emits light while fabric reflects it, and because each fibre, base colour and print method takes up dye differently. You can close most of the gap by sending an RGB file, choosing the right base fabric for your colours, and testing on a swatch or a small test print before you order a full run.

This guide explains the six most common reasons printed colours shift, what you can and cannot control, and a simple checklist for colour-critical projects such as brand colours or collections that must match across fabrics.

Why printed colours look different from your screen

1. Screens glow, fabric reflects

A monitor creates colour with backlit red, green and blue light, so it can show very bright, saturated colours that no dye on cloth can reproduce. Fabric only reflects the light around it. Neon-bright greens, electric blues and glowing pinks are usually the colours that look most muted once printed. Screens also differ from each other: brightness, calibration and night-mode settings all change how your file looks before it ever reaches us.

2. Each fibre takes up dye differently

The same file can look slightly different on cotton, viscose, silk and polyester, because each fibre is printed with a different dye system:

Fibre Print method What to expect
Cotton, viscose, linen Reactive printing Dye bonds with the fibre; soft hand. Natural fibres can show subtle variations in colour absorption.
Some canvas and muslin orders Pigment printing (depending on the order) Colour sits on the surface of the fibre; can look slightly less saturated than reactive.
Silk Acid printing Rich colour with the natural lustre of silk.
Polyester and Lycra Sublimation Ink becomes part of the fibre through heat; vibrant colours on sportswear and swimwear qualities.

If you want the background on dye systems, read reactive vs pigment dyes.

3. Texture and finish change how colour reads

Smooth, dense fabrics such as cotton sateen or cotton poplin give crisp, even colour. Open or textured fabrics such as muslin gauze, linen and French terry scatter light, so colours look softer and slightly lighter. A sheen, as on satin, makes colours look brighter from one angle and darker from another.

Printed light satin showing how a smooth, shiny surface changes how colour reads
Light Satin, 75 gsm

4. There is no white ink

Digital fabric printing does not use white ink. Every white area of your design shows the base fabric, and the base colour also sits underneath every printed colour. A pale pastel printed on a slightly creamy natural fabric will look warmer than on an optic white one.

5. Your file's colour mode and settings

Send your design in RGB. RGB files generally produce the most vibrant results, and colour conversion for printing is handled on our side. Files converted to CMYK before upload often lose saturation before printing even starts. Avoid embedding unusual colour profiles, and check your file on more than one screen if you can.

6. Lighting where you look at the fabric

Warm indoor bulbs, cool office lighting and daylight can make the same fabric look different. Always judge printed colour in daylight near a window, and compare samples under the same light.

How to get colours closer to what you expect

  1. Design in RGB and keep it. Do not convert to CMYK before upload.
  2. Choose the base for the colours. For bright, saturated sportswear colours, a sublimation quality such as Sport Lycra 230 gsm or Poly Stretch Jersey 170 gsm is a natural fit. For soft, natural-fibre garments, accept that colours will read slightly softer on cotton or linen.
  3. Feel and see the base first. A swatch pack (€9 plus shipping) shows each fabric's base colour, texture and sheen, labelled with name, weight (GSM) and composition.
  4. Test your own design. On sublimation (polyester and Lycra) qualities you can order a 20 × 20 cm test print of your actual design before committing to a run.
  5. Adjust, then order. If a colour prints too dark or too dull, adjust that colour in your file and test again rather than changing the whole design.
  6. Keep matching pieces together. If several pieces must match, such as a top and leggings set, print them on the same quality where possible, since the same file looks different on different fibres.

Colours not working on fabric, or need a new colourway? Our pattern design team can recolour your pattern to your palette, fix resolution, rebuild a seamless repeat, rescale it or draw an original pattern inspired by your references, for a flat €35 per design.

See the pattern design service →

Labelled swatch cards for cotton jersey, brushed cotton jersey, modal cotton jersey and stretch viscose jersey
Swatch cards: cotton jersey, brushed cotton jersey, modal cotton jersey, stretch viscose jersey

Colours that need extra care

  • Neon and fluorescent shades: screens can show them, dyes generally cannot. Expect a duller result.
  • Very dark navy, charcoal and black areas: fine detail can disappear into dark backgrounds. Lighten details slightly or add contrast.
  • Pale pastels and off-whites: these are most affected by the base fabric colour.
  • Skin tones and brand colours: small shifts are noticeable. Always test first.
  • Gradients: photographic images and gradients print well digitally, but check them on the fabric you plan to use.

What happens after you upload

After you upload your design and choose a fabric, we email you a CAD proof with a ruler so you can confirm the print size. The proof is for scale and placement; on-screen colour in a proof is subject to the same screen limits described above, which is why we recommend a physical test for colour-critical work. Every order goes through quality control, including a visual inspection for print quality and colour accuracy, before it ships.

For how printed colour holds up over time, see our guides to colorfastness and washing fastness.

Want colours you can count on? Order a swatch pack to see each base fabric, then upload your design for a test or a full run. Need a new colourway or a print-ready file? Use our pattern design service. Printing regularly for a brand? Open a trade account, or contact us with your colour brief and fabric and we will help you plan a test.

FAQ

Why are my printed fabric colours darker than on screen?

Your screen is backlit and usually set brighter than real-world light. Fabric reflects light and absorbs some of it, so colours often look darker or less saturated. Lighten the affected colours slightly and test again.

Should I send RGB or CMYK files for fabric printing?

RGB. RGB files generally produce the most vibrant results, and colour conversion for printing is handled for you.

Will the same design look the same on cotton and polyester?

Not exactly. Cotton is reactive printed and polyester is sublimation printed, and each fibre takes up dye differently, so colours may vary slightly between fabric types.

Can I see my colours on fabric before ordering a full run?

Yes. A swatch pack shows the base fabrics, and on sublimation qualities you can order a 20 × 20 cm test print of your own design. For natural fibres, contact us to plan a test before a 5 m run.

Why does white in my design look cream or grey?

There is no white ink in digital fabric printing, so white areas show the colour of the base fabric. Choose an optic white base if a bright white matters.

Leave a comment

Please note: comments must be approved before they are published.