Yes, most custom printed fabric shrinks a little when it is washed, and natural fibres such as cotton shrink more than polyester. For most of our printed cotton jerseys, French terry and rib knits the estimated shrinkage is below 5%, woven polyester such as satin, chiffon and rainwear fabric is 0–2%, and loosely woven cotton muslin is the exception at around 8% in width and 14% in length, so pre-wash before cutting and add an allowance to your yardage.

This guide shows the estimated shrinkage for our most requested qualities, why printed fabric shrinks, and five practical ways to stop shrinkage from spoiling a garment, a quilt or a production run.

Why does printed fabric shrink?

Fibres and yarns are stretched under tension while fabric is knitted or woven. When the cloth is later wet and dried, the fibres relax and the fabric draws back towards its natural size. How much it moves depends on three things:

  • Fibre. Cotton, viscose and linen absorb water and swell, so they move more. Polyester absorbs very little and is far more stable.
  • Construction. Open, loosely woven cloth such as double gauze has room to contract; dense poplin or satin has less.
  • Finishing and care. Hot washes and tumble drying generally cause more shrinkage than cool washes and line drying.

Reactive printed fabrics (cotton, viscose, linen) are washed and steamed after printing to fix shrinkage and colours. Sublimation printed polyester is heat-set instead. Even so, natural-fibre fabric can still move a little in its first washes, which is why the figures below matter.

Estimated shrinkage by fabric

These are the estimated shrinkage figures listed for each quality on our Print Your Own Fabrics page. Treat them as a planning allowance, not a guarantee, since care conditions vary.

Fabric Composition / weight Estimated shrinkage
Cotton Stretch Jersey 95% cotton, 5% elastane, 210 gsm below 5%
Organic Cotton Jersey 95% organic cotton, 5% elastane, 210 gsm below 5%
Stretch French Terry 95% cotton, 5% elastane, 250 gsm below 5%
Cotton Rib Knit 1x1 / 2x1 95% cotton, 5% elastane, 230 gsm below 5%
Organic Cotton Poplin 100% organic cotton, 120 gsm below 4%
Cotton Muslin (double gauze) 100% cotton, 120 gsm 8% width, 14% length
Cotton 4 Layer Gauze 100% cotton, 240 gsm below 5%
Stretch Denim 70% cotton, 28% polyester, 2% elastane, 250 gsm below 5%
Sport Lycra / Swimwear 88% polyester, 12% Lycra below 5%
Rainwear Fabric 100% polyester, 120 gsm below 2%
Light Satin 100% polyester, 75 gsm 1–2% length, 0–1% width
Chiffon 100% polyester, 50 gsm 0–1%

The full range of 63 qualities, with current widths and weights, is available on request. If the quality you want is not listed, contact us before you order.

What 5% shrinkage means in practice

Small percentages add up quickly on longer pieces:

  • A 70 cm T-shirt body cut from unwashed jersey could finish around 3.5 cm shorter at 5% shrinkage.
  • A 120 cm swaddle cut from unwashed muslin could lose roughly 17 cm in length at 14%.
  • Across 5 m of fabric, 5% is 25 cm, enough to lose a pattern piece.

The print shrinks with the cloth. A 10 cm motif on muslin will be noticeably smaller after washing, and a placement or border print engineered to an exact measurement can end up out of position.

Five ways to stop shrinkage from ruining your project

1. Pre-wash before you cut

Wash and dry the fabric the way the finished item will be cared for, then cut. This lets the cloth relax first, so the garment keeps the size you cut it to. For a production run, wash a measured test piece first and record how much it moved.

2. Order a small allowance on top of your yardage

Add at least the estimated shrinkage percentage to the metres you need, and more for muslin. Minimums are 5 m per design for reactive-printed cotton, viscose and linen qualities; the minimum for each quality is on the fabric pricing page.

To allow for shrinkage and defect removal, production may also start with slightly more fabric than you ordered. If the finished run comes out longer, we ask you first: you decide whether to take and pay for the extra metres, and if you do not want them they are not shipped or charged.

3. Choose the right fabric for dimensionally critical items

If an item must keep exact measurements, such as labels, panels or lining, a woven polyester quality like satin, chiffon or rainwear fabric will move far less than cotton. For baby muslin, accept the movement and plan for it: muslin prints are also likely to be off-grain, which is normal for this open weave.

4. Scale the design for its finished size

If your motif or border must measure exactly after washing, enlarge the file by the shrinkage percentage before printing. For muslin, that means scaling width and length separately. Every order comes with a CAD proof with a ruler, so you can check the printed size before anything is printed.

Need your design rescaled for shrinkage, or not sure your repeat is print-ready? Our pattern design team can fix resolution, rebuild a seamless repeat, rescale it or draw an original pattern from your inspiration, for a flat €35 per design.

See the pattern design service →

5. Test before a full run

The simplest test is to order a swatch pack (€9 plus shipping). Each swatch is labelled with fabric name, weight (GSM) and composition, so you can wash a swatch, measure it and feel how the hand changes. On sublimation qualities you can also order a 20 × 20 cm test print of your own design.

Care instructions to give your customers

If you sell finished products, a simple care label reduces returns. As a general guide for printed cotton and viscose:

  • Wash cool, inside out, with similar colours.
  • Avoid tumble drying, or use a low heat setting.
  • Reshape knits while damp and dry them flat.
  • Iron on the reverse side.

For more on how prints hold up in the wash, see our guides to washing fastness and colorfastness.

Ready to plan your order? Order a swatch pack to test shrinkage yourself, then upload your design. If your file needs rescaling or a cleaner repeat, use our pattern design service. Ordering regularly for a brand or shop? Open a trade account.

FAQ

Does custom printed cotton fabric shrink?

Yes, a little. Most of our printed cotton jerseys, French terry and rib knits have an estimated shrinkage below 5%, and cotton poplin below 4%. Cotton muslin shrinks more, around 8% in width and 14% in length.

Does polyester sublimation fabric shrink?

Less than cotton. Our woven polyester satin, chiffon and rainwear fabrics are estimated at 0–2%, and stretch Lycra qualities below 5%, so woven polyester is a good choice when exact measurements matter.

Should I pre-wash printed fabric before sewing?

For cotton, viscose, linen and especially muslin, yes. Wash and dry it the way the finished item will be cared for, then cut.

How much extra fabric should I order to allow for shrinkage?

At least the estimated shrinkage percentage of your quality, plus a little for cutting. For muslin, plan for about 14% extra in length.

Will my printed design get smaller after washing?

The print shrinks with the fabric. If a motif must measure exactly, scale the file up by the shrinkage percentage, or contact us to plan it before printing.

Leave a comment

Please note: comments must be approved before they are published.