Custom fabric printing for small clothing brands works best when you test on swatches first, print your first run at the minimum per design (5 m on reactive-printed cotton, viscose and linen; from 1 m on sublimation-printed polyester), and only then scale up through a trade account. That way a new label can launch a printed collection with its own designs without committing to mill-sized minimums or holding stock it cannot sell.

This guide is for independent designers, start-up fashion labels, kidswear makers and Etsy or Shopify sellers who want their own printed fabric. It covers what to print on, how much to order, how to prepare files and how to move from a first sample to repeat production.

Why small brands print their own fabric

Off-the-roll prints are available to everyone, so a garment made from them is easy to copy and hard to price as unique. Printing your own design gives you:

  • A product nobody else sells. Your print becomes part of the brand, not just the fabric.
  • Small, controlled runs. Digital printing has no screens to make, so you can print a few metres of each design instead of a full mill run.
  • Colourways and scale on your terms. The same design can be printed at a different size for kidswear and adult pieces, or recoloured for a new season.
  • Reorders of a proven print. When a design sells, you print it again rather than hunting for a discontinued bolt.

Step 1: choose the right base fabric

The base fabric decides the print method and the minimum. Cotton, viscose and linen are reactive printed; polyester, sportswear and swimwear fabrics are sublimation printed; silk is acid printed. Popular choices for small clothing brands:

Product Typical base Print method Minimum per design
T-shirts, leggings, kidswear Stretch Cotton Jersey 210 gsm or Organic Cotton Jersey 210 gsm Reactive 5 m
Sweatshirts, hoodies, joggers French Terry 250 gsm Reactive 5 m
Dresses, blouses, shirts Woven Viscose 120 gsm or Cotton Poplin 120 gsm Reactive 5 m
Baby swaddles, bibs Muslin Gauze 120 gsm Reactive 5 m
Activewear, swimwear Sport Lycra or Swimwear fabric Sublimation From 1 m
Drapey dresses, sportswear tops Poly Stretch Jersey 170 gsm or Scuba 220 gsm Sublimation From 1 m

If you are torn between two bases, feel them side by side. The swatch pack (€9 plus shipping) has labelled swatches showing fabric name, weight (GSM) and composition, so you can compare hand, stretch and opacity before you design around a fabric.

Step 2: get the file right before you order

Most problems in a first run come from the file, not the printing. Before you upload:

  • Resolution: 300 DPI at the actual printed size, in RGB. Our guide to DPI for fabric printing lists the pixel sizes you need.
  • Repeat: upload one seamless tile at its real size, not a full-width panel.
  • Scale for the product: a 30 cm motif that looks great on a dress can be cut in half on a toddler T-shirt. If you sell several sizes, check the print on the smallest pattern piece.
  • Direction: one-way prints (animals, florals with stems, text) must run the way the garment is cut.
  • Rights: only upload artwork you own or have permission to use.

Every order comes with a CAD proof with a ruler, so you confirm the printed scale before anything is printed.

Have a sketch or mood board but no print-ready file? Our pattern design team can fix resolution, rebuild a seamless repeat, rescale it for your product or draw an original pattern inspired by your references, for a flat €35 per design.

See the pattern design service →

Step 3: test before a full run

Colour on fabric never matches a backlit screen exactly, and each fibre takes up dye a little differently. Two low-cost ways to test:

  • Swatch pack: check base fabrics, weight and hand.
  • 20 × 20 cm test print: on sublimation (polyester and Lycra) qualities you can print your own design as a small test first.

For cotton and other natural fibres, wash a test piece and measure it before cutting a production run. Our guide to shrinkage by fabric explains how much allowance to add.

Step 4: plan your first production run

Work backwards from the garments you want to make. Lay out your pattern pieces on the fabric width, add an allowance for shrinkage and cutting, and round up to the minimum per design. A few practical points:

  • Minimums are per design. Five designs on cotton jersey means at least 25 m in total. On sublimation qualities you can start from 1 m per design.
  • Production time: for cotton base fabrics, production takes 7–21 days after CAD approval and payment, and you are given a date before you commit.
  • Extra metreage: production may start with slightly more fabric than ordered to allow for shrinkage and defects. If the finished run is longer, you are asked first, and extra metres you do not want are neither shipped nor charged.

When the plan is ready, upload your design, choose the fabric and quantity, and approve the proof.

Step 5: scale up with a trade account

Once a print sells and you are reordering, a trade account is built for brands, fabric shops and manufacturers. It gives you volume pricing quoted per quality and metreage, a named contact, a production date before you commit, and EUR.1 / origin documentation where the destination qualifies. The arithmetic behind our trade prices is shown on the trade pricing page. On reorders of the same quality, the new lot is compared against your previous order, and if the base fabric differs you are told before printing.

Ready to launch your printed collection? Order a swatch pack to choose your base, then upload your design. Need help turning an idea into a pattern? Try our pattern design service, or browse independent designers in our Artist Corner. Producing regularly? Open a trade account, or contact us with your quality, metreage and destination.

FAQ

What is the minimum order for custom fabric printing for a small brand?

5 m per design on reactive-printed cotton, viscose and linen qualities. Sublimation-printed polyester has no minimum and can be ordered from 1 m.

Can I print several designs in one order?

Yes. The minimum applies to each design, so plan metreage per print. The minimum for every quality is on the fabric pricing page.

Which fabric is best for a kidswear brand?

Stretch or organic cotton jersey (210 gsm) is a common choice for T-shirts, leggings and loungewear, and muslin gauze for swaddles and bibs. Order a swatch pack to compare them.

Do I need my own designs?

No. You can upload your own artwork, commission an original pattern through our pattern design service, or choose from independent designers in the Artist Corner.

Do I need a trade account for my first order?

No. You can order directly by uploading your design. A trade account is useful once you reorder regularly or need volume pricing.

Leave a comment

Please note: comments must be approved before they are published.